Repairing Your Car Headliner – Easy Steps to Follow

If you have a car headliner that needs repair, it can be a daunting task to take on. But with the right steps and knowledge, you can get your vehicle looking as good as new.

This article will provide easy-to-follow instructions for repairing your car headliner quickly and efficiently so you don’t have to worry about spending time and money at the mechanic’s shop. With these simple fixes, you’ll be back on the road in no time!

Remove Existing Headliner


Removing an old headliner from your car can be a daunting task. However, with the right tools and knowledge, you can easily accomplish this project in no time. To get started, you should first inspect the area to determine what type of material is used for your vehicle’s headliner.

Depending on the age of your car and its make and model, there may be several different types of materials used – vinyl, foam-backed cloth, or even fabric-covered cardboard panels. Once you have identified the material being used, you will need to gather all necessary supplies such as scissors or a sharp knife (for cutting), cleaning rags, adhesive remover (if needed), and protective gloves before beginning work on removing the existing headliner.

When it comes to actually removing the headliner from your vehicle’s roof panel or pillars (depending on where it is located), start by carefully peeling away any loose edges that are already unglued. Take extra care when doing this so as not to damage any other part of your interior trim! Next use either scissors or a sharp knife to cut through any remaining adhesive keeping it attached – take caution so that you don’t accidentally slice into anything else in the process!

Finally, if there are any pieces stuck down more firmly than others use an adhesive remover spray specifically designed for automotive purposes which should help loosen up stubborn bits before they too can be removed safely without damaging underlying surfaces. With all these steps completed correctly and safely following proper safety protocols throughout removal should mean that soon enough replacing new materials onto the ceiling of your car will become much easier!

Prepare New Material for Installation

Having the right materials for your car’s headliner installation is key to ensuring that the job gets done correctly. Before you start, make sure to check what type of material you need and gather all necessary supplies, including tools such as staple guns, screwdrivers, and fabric glue.

Additionally, research the best adhesive or double-sided tape available to properly secure the material while installing it. Consider picking up a few extra pieces of material just in case there are mistakes or discrepancies during installation. Once everything has been gathered and accounted for, you can begin preparing your new material!

Secure New Material to the Roof of the Car


Securing new material on the roof of your car is one of the most important steps in repairing a headliner. As such, it’s essential to choose the right type and amount of material for this project.

The ideal choice is a lightweight fabric or foam that will be easy to stretch and secure firmly in place. If you don’t have any experience with fabrics, it might be wise to have an expert help you pick out something appropriate for your car’s roof size and shape.

Once you’ve selected your material, lay out a large enough piece on the floor before cutting it into manageable pieces that can fit onto the roof without overlapping too much or leaving gaps between them. Then use heavy-duty staples or adhesive tape to attach each piece securely onto the ceiling of the car – make sure all corners are fully secured before moving on to step two!

Trim and Install Edging or Molding


When it comes to repairing your car headliner, trimming and installing edging or molding is an important step. This process often requires specialized tools such as a razor blade, metal shears, staple gun, and glue gun. To begin the process of installation, use the razor blade to cut away any excess fabric from around the edges of the headliner.

Then measure and mark where you will need to install edging or molding on each corner of the headliner board. Cut four pieces that are slightly longer than what is needed for each side – this will allow for some extra room when fastening in place with staples or glue.

Once all four pieces have been cut and marked for fitment, secure them onto the board with either a staple gun or hot glue gun depending on which material was used for edging/molding. Finally, trim off any excess length from each piece before reinstalling into your vehicle’s interior cabin space. With these tips in mind, you can easily repair your car headliner using trim and install edging or molding!



Repairing your car headliner is an easy process that can save you a lot of money in the long run. With the right tools and step-by-step instructions, anyone can do it on their own. You can find a wide variety of materials at any auto parts store, so finding what you need should be relatively simple.

It’s important to take your time while doing this project since proper adhesive and technique will ensure that your car headliner looks great for years to come. The process may seem daunting at first, but with some patience and dedication, you’ll have no trouble repairing your car headliner yourself!